dbx ZonePRO Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Perangkat Keras Komputer dbx ZonePRO. dbx ZonePRO 2 halaman. String calculator
Juga untuk dbx ZonePRO: Panduan Memulai Cepat (6 halaman)

Halaman Cetak

Connecting to a ZonePRO Device

Connect your computer to the ZonePRO device using either the included RS-232 Null

Modem cable or via Ethernet as shown in the below diagrams.

RS-232 Computer Connection

ZonePRO

dbx RS-232 Null

RS-232 to USB

Modem Cable

Serial Adapter

Computer

(Required if computer

w/ RS-232 or USB Port

doesn't have a serial port)

Diagram A

Ethernet Direct Computer Connection

ZonePRO

Crossover Ethernet Cable

(Must be a crossover Ethernet cable,

Computer

a straight-through Ethernet cable will not work)

w/ Ethernet Port

Diagram B

Ethernet Computer Connection w/ Switch or Router

ZonePRO

Network Switch

or Router

WAN

LAN

Computer

w/ Ethernet Port

Straight-Through Ethernet Cables

Diagram C

Going Online with a ZonePRO Device

You can connect to a ZonePRO device (referred to as going "online") then program it in

real time or load a pre-programmed file into the device. To go online with a ZonePRO

device follow these steps:

A. To Connect via Serial

Go to Windows Device Manager > Ports

(COM & LPT) and double-left-click on the

COM port you wish to use for connecting to the

ZonePRO.

Make sure the serial port settings are set as

shown in the screenshot to the right.

NOTE: Not all USB to Serial Adapters will work

with the ZonePRO devices. Please visit dbxpro.

com for additional information on compatible

USB to Serial adaptors.

Go to step C.

To Connect via Ethernet

In order to initially connect to a ZonePRO

device via Ethernet, the computer must have

an IP address that conforms to the Automatic

Private IP Addressing standard (i.e., IP:

169.254.X.X, subnet mask: 255.255.0.0).

Go to Windows Start Menu > Control Panel

> Network and Internet > Networking and

Sharing Center > Local Area Connection

> Properties. Double-left-click the "Internet

Protocol Version 4" option.

If connecting directly to the computer (as

shown in Diagram B to the left), take note of

your current settings and set your computer's

network interface card to obtain an IP address

automatically then click the OK button.

If connecting via a router or switch with DHCP

enabled (as shown in Diagram C to the left),

take note of your current settings and set the

computer's network interface card with a static

IP address, such as the one shown to the right,

then click the OK button.

B. Launch the ZonePRO Designer application.

C. A ZonePRO icon should automatically appear

in the main window if a connection to the

ZonePRO device is established. Double-left-

click the ZonePRO icon to open the Program

Screen window then go to step 5.

If the ZonePRO Device icon did not

automatically appear, go to Network >

Properties.

If connecting via serial, ensure the "Use serial

ports" box is checked and that the COM port

number identified in step A is checked then

click the Finish button.

If connecting via Ethernet, uncheck the "Use

serial ports" box and ensure the "Use Ethernet"

box is checked then click the Finish button.

Select Network > Go Online.

The ZonePRO icon should appear in the main

window. Double-left-click the icon to open the

Program Screen window then go to step 5.

If a connection to the ZonePRO device still

can't be established, please refer to the

ZonePRO Install Guide.

Programming a ZonePRO

A. From the Program Screen window, go to

Wizard > Configuration Wizard.

Follow the on-screen instructions to program

the ZonePRO device.

When done, click the Finish button

B. Double-left-click any blocks in the Program

Screen window to edit ZonePRO audio

processing settings.

C. Store the programmed scene by clicking the

Store Scene button, selecting the scene

location, naming the scene, then clicking the

OK button.

D. If scene recalls requiring Zone Controller

assignment changes are required for the

application, such as when combining rooms,

select Wizard > Scene Wizard.

Follow the on-screen instructions then click the

Finish button.

Repeat steps B-D until all scenes required for

the application have been created.

E. If required for the application, select Wizard

> Schedule Wizard to schedule automatic

ZonePRO scene changes.

F. To save the program file to your computer's

hard drive for backup or for loading into a

ZonePRO device at a later time, select File >

Save from the Program Screen window.

G. To load a program file into a ZonePRO device,

select File > Open from the Program Screen

window then select the ZPD file from your

computer's hard drive.

Thanks for choosing dbx.