DYNAPAR SimTach A STAE0 Panduan Teknis - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Teknis untuk Panel sentuh DYNAPAR SimTach A STAE0. DYNAPAR SimTach A STAE0 4 halaman. Analog input speed indicator

Halaman Cetak
SPECIFICATIONS
Page 4
Input Power:
Display:
Decimal Point:
95 to 130 VAC, 50/60 Hz, or
190 to 260 VAC, 50/60 Hz, 6
VA
± 4 -1/2 Digit, 0.56" Red LED
Switch Selectable XXXXX. to
X.XXXX
Scale Factor Range:
Gain Adjust Pot:
Digital Calibrator:
Accuracy:
Stability:
5% to 200%
0.001 to 0.999
(0.000
=
Calibration of 1)
±0.1% -0/+1 Digit
Display Update Rate:
Switch Selectable
Operating Temperature: 0 to +50 °C. (32 to +122 of.)
Fast:
Slow:
2 Hz (2 times per second)
0.5 Hz (every two seconds)
Dimensions:
Overall:
1.98" x 3.78" x 6.03"
Overvoltage Indication: Display Flashes All "O's"
50 mm x 96 mm x 150 mm
1.78" x 3.58" (-0/+0.04")
Cutout:
Signal Input Range:
Switch Selectable
45 mm x 91 mm (-0/+1 mm)
1/16" to 1/4"
o
to ± 20/200/600 VDC
Panel Thickness:
Panel Depth:
5.68" (144 mm)
Weight:
1.4Ibs.
ORDERING INFORMATION
MODEL
STAOO
STAEO
STASO
DESCRIPTION
SimTach A Analog Input Speed Indicator, 115 VAC Operation
SimTach A Analog Input Speed Indicator, 230 VAC Operation
SimTach A Analog Input Speed Indicator, 115/230 VAC Selectable Operation
SimTach A Analog Input Speed Indicator with Digital Calibration, 115 VAC Operation
SimTach A Analog Input Speed Indicator with Digital Calibration, 230 VAC Operation
STA01
STAE1
STAS1
SimTach A Analog Input Speed Indicator with Digital Calibration, 115/230 VAC Selectable Operation
WARRANTY
Standard products manufactured by the Company are warranted to be free from defects in workmanship and material for
a period of one year from the date of shipment, and products which are defective in workmanship or material will be repaired
or replaced, at the option ofthe Company, at no charge to the Buyer. Final determination as to whether a product is actually
defective rests with the Company. The obligation of the Company hereunder shall be limited solely to repair and
replacement of products that fall within the foregoing limitations, and shall be conditioned upon receipt by the Company
of written notice of any alleged defects or deficiency promptly after discovery within the warranty period, and in the case
of components or units purchased by the Company, the obligation of the Company shall not exceed the settlement that
the Company is able to obtain from the supplier thereof. No products shall be returned to the Company without its prior
consent. Products which the Company consents to have returned shall be shipped F.O.B. the Company's factory. The
Company cannot assume responsibility or accept invoices for unauthorized repairs to its components, even though
defective. The life of the products of the Company depends, to a large extent, upon the type of usage thereof, and THE
COMPANY MAKES NO WARRANTY AS TO FITNESS OF ITS PRODUCTS FOR SPECIFIC APPLICATIONS BY THE
BUYER NOR AS TO PERIOD OF SERVICE UNLESS THE COMPANY SPECIFICALLY AGREES OTHERWISE IN
WRITING AFTER THE PROPOSED USAGE HAS BEEN MADE KNOWN TO IT.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR
A
PARTICULAR PURPOSE.
SERVICE:
Include:
If this product requires service, call Dynapar Corp. for an RMA (Return Material Authorization)
number, pack it in a sturdy carton and ship prepaid to: Service Dept. at address below.
1.
Description of problem
3. Purchase order number
2. Name of responsible person
4. Return shipping instructions
DANAHER CONTROLS •
2100 W. Broad St., P.O. Box 368, Elizabethtown, NC 28337
TEL: (847) 662-2666
FAX: (847}662-6633
160 0250 0132
Printed in U.S.A.
April 20, 1992