Galaxy Audio AS-1400 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman Galaxy Audio AS-1400. Galaxy Audio AS-1400 12 halaman. Wireless personal monitor
Juga untuk Galaxy Audio AS-1400: Panduan Pengguna (12 halaman)

Halaman Cetak

System Setup

GROUP
CHANNEL
STEREO
MONO
R
Fig. 1
GROUP
CHANNEL
STEREO
MONO
R
Fig. 2a
GROUP
CHANNEL
STEREO
MONO
R
Fig. 2b
GROUP
CHANNEL
STEREO
MONO
R
Fig. 3
GROUP
CHANNEL
STEREO
MONO
R
Fig. 4
System Setup
Programming the Transmitter
1. Power On:
Hold the power button for 3 seconds to power on the transmitter.
Display will light up. Hold for another 3 seconds to turn off.
MHz
2. Frequency Group and Channel Selection:
Press the "SET" button. The display will flash "GROUP". Press
or
to select a suitable frequency group number as shown in Fig. 2a.
MHz
Press "SET" again. The display will flash "CHANNEL". Press
or
to select a suitable channel as shown in Fig 2b.
Note: When using multiple systems, for optimum results, set all of the
systems to the same group number and select a different channel
number for each system in that group.
MHz
3. Stereo/Mono Input Mode Selection:
Press the "SET" button 3 times, the "STEREO" will flash. Press
or
button to select Stereo or Mono, then press set again to set
the selected mode as shown in Fig. 3.
MHz
4. Locking Control Selection:
Press the "SET" button 4 times, the "
or
button to select Lock or Unlock status as shown in Fig. 4.
MHz
6
" will light up. Press