Dynapower TurboBox NA211A-LD Panduan Instalasi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Perangkat Keras Jaringan Dynapower TurboBox NA211A-LD. Dynapower TurboBox NA211A-LD 5 halaman.

Halaman Cetak
NA211A-LD
External PCIe Slot Expansion Box
‧For laptop
A. Connect the end of PCI Express data cable with
screw connector to Turbo
ExpressCard 34 host adapter.
B. Insert the Turbo ExpressCard 34 host adapter
into the ExpressCard slot on laptop.
‧For desktop PC
WARNING: Before the installation of the host adapter card on
desktop PC, be sure to disconnect the power source
from the desktop PC in order to prevent electric
shock or damage to the add-on card.
A. Install Turbo PCI Express host
adapter card into a
PCI Express ×4 slot
(a PCI Express ×8 or ×16 slot
is also available) on desktop PC,
and then tighten the screw on
the riser to the desktop PC.
B. Connect the end of PCI Express ×4 data
cable to Turbo PCI Express
host adapter card on desktop PC.
8.
Power on the TurboBox
Press the power button for
three seconds to
power on the TurboBox.
9.
Power on the computer
You should always power on TurbBox first, and then
turn on the computer in order to make BIOS on
computer identify TurboBox and arrange resources in
an appropriate way.
Software or driver is not needed after the connection
between TurboBox and computer is made, but as a third
party PCIe card is installed in TurboBox, a request for
driver of the third party PCIe card will be prompted by
the operating system.
10.
Remove TurboBox and power off
‧For removing NA210A-LD from laptop
A. Double click the icon of safely remove hardware
in the bottom right side of the screen, and then
disconnect TurboBox from the application.
B. Power off TurboBox.
motherboard
‧For desktop PC
A. Power off desktop PC.
B. Power off TurboBox.
11.
Verify installation
‧For Windows operating system
When you want to verify a successful installation on
Windows operating system, go to My Computer and
right click the icon of My Computer. Select Manage
from the menu (see figure 9-1), and click
Device Manager in the left side of window of
Computer Management (see figure 9-2).
Figure 9-1
Figure 9-2
And then click View from the top side of the window, and
select Devices by connection.
Open ACPI Multiprocessor PC, open Microsoft
ACPI-Compliant System, open PCI bus, click PCI Express
Root Port, click PCI standard PCI-to-PCI bridge, and click
again PCI standard PCI-to-PCI bridge. And then you will
find your third party PCIe card under PCI standard
PCI-to-PCI bridge.