Galaxy Audio DHXR4 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mikrofon Galaxy Audio DHXR4. Galaxy Audio DHXR4 20 halaman. Any spot wireless microphone system
Juga untuk Galaxy Audio DHXR4: Panduan Memulai Cepat (2 halaman)

Halaman Cetak
Galaxy Audio DHXR4 Panduan Pengguna
GROUP
CHANNEL
MHz
VOLUME
AUTO
GROUP
MANUAL
DISPLAY
CONTROL
CHANNEL
SELECT
CHANNEL FREQUENCY
SELECT
SELECT
SELECT
1
GROUP
CHANNEL
MHz
MANUAL
VOLUME
AUTO
GROUP
DISPLAY
CONTROL
CHANNEL
SELECT
CHANNEL
FREQUENCY
SELECT
SELECT
SELECT
2
GROUP
CHANNEL
MHz
VOLUME
AUTO
GROUP
MANUAL
DISPLAY
CONTROL
CHANNEL
SELECT
CHANNEL FREQUENCY
SELECT
SELECT
SELECT
3
GROUP
CHANNEL
MHz
VOLUME
AUTO
GROUP
MANUAL
DISPLAY
CONTROL
CHANNEL
SELECT
CHANNEL FREQUENCY
SELECT
SELECT
SELECT
4
GROUP
CHANNEL
MHz
VOLUME
AUTO
GROUP
MANUAL
DISPLAY
CHANNEL FREQUENCY
CONTROL
CHANNEL
SELECT
SELECT
SELECT
SELECT
5
Handheld
Body Pack
Transmitter
Transmitter
1
2
3
Receiver Programming
Group and Channel Selection:
ANTENNA
A
B
1
Press "SET" button twice, "GROUP SELECT" will display,
press
2
Press "SET"again , "MANUAL CHANNEL SELECT" will
display, press
ANTENNA
A
B
For best results when operating multiple systems, set all
systems to a single group, then set each system to a unique
channel within that group. However, depending on the
environment, this may not be possible.
ANTENNA
Auto Frequency Finder Function on the Receiver:
A
B
3
Choose "AUTO CHANNEL SELECT" by pressing "SET" once,
then press
frequency with no interference.
Receiver Volume Setting:
ANTENNA
A
B
4
The receiver has an electronic volume control. Press
from the normal display (00 to 63)
Normal Display:
5
Frequency and Antenna A or B (when receiving RF).
ANTENNA
A
B
Transmitting Frequency Automatic Setup:
Place the Transmitter "IR" window to face the Receiver "IR"
window. Then press the "ADS" button on the desired Receiver.
The Transmitter will automatically match the Receiver frequency.
Attention: The distance between the Receiver and Transmitter
IR windows should be less than 0.5m during the ADS IR setup.
When setting up multiple Transmitters/Receivers, activate the
ADS function of only one Transmitter and Receiver at a time.
MBP77 Transmitter Status Display
Battery Status:
1
Battery Status Indicators for both the Handheld and Body
Pack Transmitters feature Four Level Displays.
Group and Channel Display:
2
After completing the ADS, both the Handheld and Body Pack
Transmitters will display the Group and Channel numbers
selected.
Normal Display:
Both Handheld and Body Pack Transmitters will display
3
Group and Channel numbers as well as Battery Status.

DHXR4 System Setup

DHXR4 System Setup
or
to choose the appropriate frequency group.
or
to choose the appropriate channel.
. Receiver will automatically find a clear
or
or
11