dynarex 10405 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Medis dynarex 10405. dynarex 10405 10 halaman. Bariatric hd full electric home care bed
Juga untuk dynarex 10405: Manual (16 halaman)

Halaman Cetak

Installing the Head and Foot Boards

1. Start with footboard installation. Stand the footboard

section as close to the foot frame as possible. Ensure

the board and frame are paired correctly using the

label on the boards.

2. Lift the foot frame and hook onto the head board

rivets. Do not place your hand between the frame and

the head board when joining the two pieces together.

3. Repeat the previous steps for head board installation.

4. Fix a screw above the top hook to securely lock the

frame and the boards together.

After the bed frame is levelled, secure the head and

foot frame joint with bolts and nuts.

Bariatric HD Full Electric Home Care Bed (Reorder Nos. 10403 & 10405)

EQUIPMENT ASSEMBLY

(continued)

Connecting the Motors

1. Connect the Hi-Lo motors on the bed ends to the port

on the end of the bed frames. Hinge open the port

to insert the cable. The arrows on the cable and port

should face the same side. Ensure the connection is

tight and close the port cap.

2. Connect the knee break motor and foot side Hi-Lo

motor cables to the control box. First, remove the

control box locking lid by pressing in the sides and

lifting it up.

3. Insert the cables from the foot frame into the control

box ports. The cables and ports are color coded.

When inserting the cables, ensure the arrow on the

cable is facing up. Reinstate the locking lid after the

connections are in place.