activTek ACTIVEPURE Panduan Pemilik - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembersih Udara activTek ACTIVEPURE. activTek ACTIVEPURE 16 halaman.

PANEL CONTROLS

Change Filter

See owner's manual for proper operation.

If UV indicator LED fails, UV bulb requires service.

UV 2

UV 1

Low

Fan

Disconnect

Power

Before

Servicing

SelectPURE

• The SelectPURE unit should be installed within 7 feet of a standard 120 volt

outlet to accommodate the power cord .

• The SelectPURE unit should be secured into wall studs if possible . Mounting

holes are on 16 inch centers to accommodate installation to be secured into wall

studs (See mounting holes indicated in illustration on page 4 .) .

• Fasteners are recommended to be at least 2 1/2 inches in length, minimum size,

#10 screws . Use appropriate fasteners when mounting .

Change Filter . . . . Light illuminates when particulate

. . . . . . . . . . . . . . . . . . Light illuminates when Mode Select is off

Turbo . . . . . . . . . . . . Light illuminates when unit is in Turbo

High

High . . . . . . . . . . . . . Light illuminates when unit is in the High

Turbo

Medium . . . . . . . . . Light illuminates when unit is in the

System On . . . . . . . Light illuminates when system is On,

Mode Select . . . . . Control knob which functions by turning

cartridges need changed .

to indicate the unit has power .

Position, Maximum Cleaning Potential .

Position, ActivePure® Activated High .

Medium Position, ActivePure® Activated .

Cartridges in use .

clockwise to select power mode .