DC MONT DC-MPPT-MPK2-40A Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengontrol DC MONT DC-MPPT-MPK2-40A. DC MONT DC-MPPT-MPK2-40A 17 halaman. Mppt controller
Halaman Cetak
PARAMETER SETTING
On the main display, long press
interface. On each interface, short press
decrease / increase the character. To confirm the setting, you can long press
to the main interface automatically, or short press
00:
Working Interface
02:
Battery Voltage(12/24/36/48V Auto Recognized)
04:
Float Charge Voltage Setting
06:
Absorption Charge Time Setting
08:
Equalization Charge Time Setting
10:
Lithium-Ion Battery Charge Recovery Voltage Setting
12:
Discharge Recovery Voltage Setting
14:
Load Working Time After Dark
16-23:
Load Time Period Control & Time Setting
25:
Communication Address Setting
M
to enter interfaces 01. Short press
M
and the character will flash. Short press
M
/
and it will enter the next interface.
01:
Battery Type Setting
03:
Battery Capacity
05:
Absorption Charge Voltage Setting
07:
Equalization Charge Voltage Setting
09:
Lithium-Ion Battery Constant Voltage Setting
11:
Discharge Cutoff Voltage Setting
13:
Load Working Mode Setting
15:
Load Working Time Before Dawn
24:
Temp. Compensation Coefficient Setting
26:
Baud Rate Setting
MONT
to enter the last / next
/
to
M
and it will go back