DC Technologies DCX-50 Plus Panduan Pengguna Ekstensi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna Ekstensi untuk Pemanjang DC Technologies DCX-50 Plus. DC Technologies DCX-50 Plus 10 halaman.

Trunk Hold and Transfer

A trunk connected to an extension can be transferred to another extension.

Consider, for example, that a trunk 01 connected to your extension 302 is to be

transferred to extension 315. You flash the cradle for ½ second, get a tone and trunk 01

goes on hold. You can then dial extension 315, after establish contact with and

consulting 315; you can put the phone down to transfer the call to 315 or dial 4 to be

reconnected to the line on hold.

On receiving a busy tone from 315, you can retrieve the call on hold by dialing a '4' or

hook flashing twice or can break into 315 call by dialing a '6' and replacing the receiver

to transfer the call on hold.

If, on the other hand, the concerned party is not available at 315, you can hook flash to

clear that call. Dial tone will be received on your line while 01 remains on hold and you

can dial any other number. You will now dial '4' or hook flash twice to get reconnected

to 01.

If any of the above operations are left incomplete and you put receiver leaving 01 0n

hold, your extension rings and 01 is connected to you.

Note: For pulse type telephones, which do not have a flash button, the digit '1' can be used only in the

case of call transfer, hold or consultation.

Trunk Transfer to Operator

An extension can transfer a trunk call to the operator by flashing the cradle once and

dialing 0. After doing that replaces your receiver immediately to let the trunk line be

connected to the operator.

Trunk Camp-On

On trying to access a trunk line and receiving a busy tone signifying the trunk is not free,

you can Camp on the trunk line from your extension by dialing '7'. The extension will

ring back when trunk line is free and the trunk is connected to your extension for dialing.

Trunk receive on Extension

If a trunk is ringing while the operator is not present at the operator console, any

extension can receive the trunk call by dialing '2'. After receive the call on extension you

can transfer to any extension.