High End Systems Universal Controller Adendum Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Adendum Panduan Pengguna untuk Pengontrol High End Systems Universal Controller. High End Systems Universal Controller 12 halaman.

Halaman Cetak

Setting the MIDI Device ID (MSC Control)

You set the controller's MIDI device ID using the Show Control menu as described below:

Page 4

Power ON the controller or press the

below:

Press the

button, then use the arrow keys around the

<Menu>

menu option (it will blink).

Press the Adjust 1

<Down>

arrow key. This displays a list of menu options which will be

different depending on whether Show Control or Channel Control has been previously saved.

Do one of the following:

•

If Dev ID is one of the displayed options, use the arrow keys around the

select Dev ID (it will blink). Then see Step 5.

•

If Dev ID is not displayed, use the arrow keys around the

Control menu option if it is not already blinking. Then see Step 4.

Press the Adjust 1

<Down>

arrow key. This displays two options: Show Control and Channel

Control. Press the Adjust 1

. This will save your selection and return you to the Main menu. Start with Step 2.

Press the Adjust 1

<Down>

Use the Adjust 1 arrow keys to select the ID you wish to use, then press

save your selection and return you to the Main menu. Note the following about the device ID:

•

You can select any ID from 0 to 126. ID 127 is reserved for the "all call" command.

•

Set all controllers for the same ID if you wish them respond to MSC commands in exactly

the same way.

•

Choose different IDs for controllers you wish to respond differently; for example,

controllers connected to different types of devices. For example, suppose you have 10

controllers, eight of which are connected to various types of multi-effect fixtures (such as

Trackspot

automated luminaires) and two of which are connected to more specialized

fixtures (such as Emulator

controllers to ID 0 and the two "Emulator" controllers to ID 1.

button to return to the Main menu, shown

DIM

READY

PAGE

001

arrow key to select Show Control (it will blink). Then press

<Up>

arrow key. This displays the following menu:

MIDI DEVICE ID

xxx

laser simulators). You could set all eight "Trackspot"

Addendum UN-1

button to select the MIDI

<Menu>

button to

<Menu>

button to select the

<Menu>

. This will