High Energy Sports Quantum Series Manual - Halaman 2

Jelajahi secara online atau unduh pdf Manual untuk Pesawat terbang High Energy Sports Quantum Series. High Energy Sports Quantum Series 13 halaman. Paraglider parachute
Juga untuk High Energy Sports Quantum Series: Manual (9 halaman)

High Energy Sports Inc
Thank you for selecting a High Energy Sports Inc parachute system. This manual will provide
you with information on the installation, operation, and maintenance of your High Energy
Sports Quantum Series parachute. It must be remembered that this is an emergency reserve
canopy designed to slow your rate of descent and reduce your chance of death.
When you contemplate the use of this system, you will probably be in a life threatening
situation, therefore to reduce your risk of serious bodily injury or death it is critical that you
follow the instillation and maintenance instructions outlined in this manual.
The information contained in this manual is not intended to replace qualified instruction in the
care and use of emergency paragliding parachutes, nor is it intended to replace the packing
and inspection duties of a qualified rigger.
We encourage you to attend as many parachute clinics as possible and practice simulated
deployments on the ground prior to each repack. If you have any questions or concerns
please do not hesitate to contact us.
To read and understand this manual before installing and/or using this parachute system.
To read all warning labels.
To fill out and return owner's registration & installation page.
Not to deviate from manufacturer's instructions or from standard practices in the installation
maintenance of the system.
Never allow abuse or misuse of the parachute in any manner.
Never exceed the operational limits of your paraglider or of yourself.
Contact High Energy Sports immediately upon emergency use of this system.
Operational Limitations
QS 330:
Maximum total suspended weight=
QS 440
Maximum total suspened weight=
QS 550:
Maximum total suspended weight=
Maximum speed=100 mph
Paraglider Harness QS Parachute Installation Guide
Your parachute was packed and transported with rubber bands keeping your risers organized.
To avoid any twists in your system, install your new parachute as follows:
1. Attach the riser loops to the shoulders of your harness by pulling the riser from the rubber
banded stows keeping the system organized.
2. Use Stainless steel Mallion Rapide links #6 or stronger to attach the risers to your harness.
3. Place your QS parachute into your parachute container located on your harness. Take
care not to twist the risers on the parachute.
4. Cut the transport rubber bands off the risers and place the parachute into the parachute
container on your harness.
INTRODUCTION

OWNER'S RESPONSIBILITIES

714-632-3323
330 lbs
440 lbs
550 lbs
2