DC-Digital DC-40N Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pengatur waktu DC-Digital DC-40N. DC-Digital DC-40N 5 halaman.
A web server is running inside the DC-40N that provides a few HTML forms useful for changing
A web server is running inside the DC
the configuration. To access these forms, point any web browser that supports H
configuration. To access these forms, point any web browser that supports HTML5 on any
configuration. To access these forms, point any web browser that supports H
connected device to the IP address
1.
IPSetup.exe
is a Windows™ program that can be used
is a Windows™ program that can be used
to discover the IP address of DC
to discover the IP address of DC-Digital products on a
local area network. Once the ZIP file has been
local area network. Once the ZIP file has been
downloaded to a Windows computer and unzipped,
downloaded to a Windows computer and unzipped,
IPSetup.exe can run without further installation.
IPSetup.exe can run without further installation.
2. The Home page contains information about the DC
40N as well as links to the configuration pages. The
Server Information and Time Information can be configured on the Clock Settings page.
The Network Information can be configure
The Network Information can be configured on the Network Settings page.
3. Click on the Clock Settings or Network Settings
Click on the Clock Settings or Network Settings link to go to that page. When o
these pages is accessed, the DC
has not already done so.
Password is "password". This can be chang
NTP Server Address - is the address of
server that the device queries.
Last Synchronized - is the date and time in local
time that the device last successfully
to the NTP Server. This is updated as the time is
synchronized with the NTP server.
synchronized with the NTP server.
Last Synchronization Attempt
Last Synchronization Attempt - will state
"Success!" in green text if the
synchronized on its last attempt or
"Network Error!" in red text
not successful. In addition, a dot will blink in the
. In addition, a dot will blink in the
upper left of the LED display until the
successful. A network error indicates an error in
successful. A network error indicates an error in
the settings or in any network entity external to the
the settings or in any network entity external to the device, including the NTP server.
Network Configuration - indicates if the network configuration is dynamic
Device Name - is the hostname of the
is the hostname of the device on the network.
Hour Format - indicates how the device is displaying time.
indicates how the device is displaying time.
Current Time Zone – will indic
Current Local Offset - reflects the number of hours
Daylight Savings Change - will indicate if daylight savings change is observed or not.
Configuration
IP address of the DC-40N.
ontains information about the DC-
to the configuration pages. The Username and Password
Time Information can be configured on the Clock Settings page.
Time Information can be configured on the Clock Settings page.
accessed, the DC-40N will prompt for a Username and Password
. The default Username is "username" and the defaul
". This can be changed on the clock settings page
The Home Page
the address of an NTP
queries.
is the date and time in local
last successfully synchronized
updated as the time is
if the device successfully
attempt or will state
in red text if the device was
display until the device is
indicates if the network configuration is dynamic (DHCP)
will indicate Standard and Daylight Time and the Time Zone
reflects the number of hours of offset from UTC for the local time.
will indicate if daylight savings change is observed or not.
will indicate if daylight savings change is observed or not.
Username and Password, NTP
will prompt for a Username and Password if it
ed on the clock settings page.
offset from UTC for the local time.
ms useful for changing
Settings page.
When one of
" and the default
he NTP server.
(DHCP) or static.
Time Zone