iHealth HS5 Panduan Pemilik - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Timbangan iHealth HS5. iHealth HS5 15 halaman. Wireless body analysis scale
Juga untuk iHealth HS5: Panduan Pemilik (15 halaman), Panduan Memulai Cepat (4 halaman), Panduan Memulai Cepat (20 halaman), Panduan Pemilik (14 halaman)

Halaman Cetak

Bluetooth connection failed

Wi-Fi sharing pop-up window

doesn't show on the iOS device

"Wi-Fi symbol doesn't

appear on the Scale display

App and Scale connection

failed

Wi-Fi symbol doesn't appear

on the Scale display

Wi-Fi symbol turns off after

ﬂashing"Er 4" on Scale display

The Scale does not respond

The Scale displays "Lo"

The Scale displays "Er 0",

"Er3","Er6", "Er7", "Er8"

The Scale displays "Er 1"

The Scale displays "Er 2"

1 Turn off and turn on the

Bluetooth, and re-establish the

Bluetooth connection.

2 If the problem persists, restart

your iOS device.

Re-establish the Bluetooth

connection

1 Make sure iOS device is connected

to a router.

2 Make sure MAC address is not

ﬁltered by router.

3 Repeat from Step 3 of "CONNECT

SCALE TO AN INTERNET ROUTER" in

the Quick Start Guide

Make sure Scale is powered on, and

Wi-Fi signal is stable, not ﬂashing.

Make sure your iOS device and Scale

is connected to the same router.

Make sure Scale is on "Set" status

by pressing the "Set" button on the

back of the Scale.

Make sure your router is powered on

and router settings such as "password"

and "name" have not been changed.

Remove the batteries from the Scale.

Wait 1 minute and re-install the batteries.

If problem persists, replace with a new

set of batteries.

Make sure batteries are installed

correctly, if the problem persists, replace

with a new set of batteries.

Remove the batteries, wait 1 minute

and then replace with a new set of

batteries. If problem persists, please

contact iHealth Customer Service.

The current weight may be beyond the

measurement range of 330 lbs/150 kg.

Place feet in the center of the Scale,

stand still, and allow the Scale to shut

off completely after weighing. Do not

move the Scale unnecessarily.