activTek MI1500B Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kipas angin activTek MI1500B. activTek MI1500B 8 halaman. Air treatment system

PLACING THE UNIT

Elevate the unit as high as possible to insure complete purification. Some pollutants such as

smoke rise and the unit, when elevated, can more effectively eliminate the pollutant.

The MI-1500B is most effective when placed in a position that allows the ions to be spread evenly

and thoroughly mixed with the polluted air. Suggested location, listed in the order of preference:

1. In or near the air stream or current within the room that will

2. Best disperse the ions

3. Nearest the source of worst pollution

4. In the area most heavily used to achieve maximum benefit

WARNING:

Ionizer Control

The adjustment and setting of the ionizer control for the MI-1500B ranges from full positive to full

negative and is determined by application. The more particulate or pollutant in the air, the higher

the settings need to be. The MI-1500B is capable of creating a static charge on objects. Locate a

setting where the pollutants or particulates are eliminated and still have a non-static situation.

Fan Control

The fan speed is adjustable for the MI-1500B.

Static Control

Static is created by an electrical imbalance between positive and negative ions and can be biased

positively or negatively. Establishment of the stronger polarity can be determined by a trial and

error method; however, the majority of all static problems are positive in nature. This means that

the best starting point for the ionizer setting is at the one o'clock position, which is a slightly

negative position. If the static problem becomes worse, turn the control to the left in small

increments until the problem has been resolved.

If the static problems has been reduced, but not

eliminated, turn the control to the right in small

increments until the problem is resolved.

Smoke, Dust, and Particulate Removal

Airborne contaminates are best removed with

the ionizer control set to the extreme right (full

negative). Depending upon the nature and degree

of the pollution, it may not be necessary to have

the control at full power.

The MI-1500B can create a high level of static electricity in an

unpolluted environment which may cause problems with static

sensitive equipment, such as computers.

fuse

on/off switch

fan

ionizer