High Lifter CLK570L-00 Manual - Halaman 4

Jelajahi secara online atau unduh pdf Manual untuk Aksesori Mobil High Lifter CLK570L-00. High Lifter CLK570L-00 11 halaman.

Note: Left and Right positions are from the seated position on the ATV.

Front Lift Installation

1) Place ATV transmission in park. Place jack under center of ATV front end and lift until front wheels clear

the ground. Be careful to support ATV properly so that it is securely supported so that A-arms and shocks

can droop to full extension.

2) Remove front wheels.

3) Disconnect the top of the shock from the ATV. (View from left side of ATV)

4) Remove the inner fenders from both sides of the ATV.

5) Insert the long front lift bracket in between the shock mounting tabs, but do not connect at this time. (View

from right side of ATV)

6) You will need to relocate the vent tube that is connected the front differential. It will interfere with the

bracket and how it mounts. The vent tube is located on the left side of the ATV.

CLK570L-00