High Lifter Arctic Cat 650 Buku Petunjuk
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sistem Pengangkatan High Lifter Arctic Cat 650. High Lifter Arctic Cat 650 6 halaman. Lift kit
Halaman Cetak780 Professional Dr. North, Shreveport, LA 71105
Phone 318.524.2270 Fax 318.524.2297
Arctic Cat 650 Lift Kit
Read before Installation
This product is designed for use on ATVs and/or RUVs to increase ground clearance and fender clearance. Purchasers should be aware
that use of this product may increase the frequency of required maintenance, part wear, and will raise the center of gravity on your ATV
and/or RUV, increasing risk of roll-over, injury and death on all types of terrain. It is your responsibility to always inform other operators
and passengers of this vehicle about the added risks.
High Lifter Products, products are designed to best fit users ATV/RUV under stock conditions. Adding, modifying, or fabricating any
OEM or aftermarket parts will void warranty. High Lifter Products, products could interfere with other aftermarket accessories. If the
user has aftermarket products on machine, contact High Lifter Products to verify that they will work together. Adding aftermarket
suspension components and/or more aggressive tires can cause breakage of other OEM driveline components such as differentials, axles
or drive shafts.
We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the ATV and/or RUV.
Riders should be advised that the handling characteristics of a taller ATV and/or RUV are different and require extra care when riding,
particularly on side hills or off-camber situations. If you further raise the center of gravity by adding taller tires, heavy loads to racks or
seats, or by any other means, the ATV and/or RUV must be operated with even more care, at slower speeds and on relatively flat ground.
All turns should be done at a slow speed, even on level ground.
Operation of an ATV and/or RUV with or without modified suspension components, while or shortly after consuming alcohol or drugs,
subjects the rider to the risk of serious bodily harm or possible death. This risk is compounded if the rider does not wear an approved
helmet and other safety gear. High Lifter urges that all approved safety gear be worn when riding an ATV and/or RUV as a driver or
passenger.
By purchasing and installing High Lifter Products, products, user agrees that should damages occur, High Lifter Products will not be held
responsible for loss of time, use, labor fees, replacement parts, or freight charges. High Lifter Products will not be held responsible for any
direct, indirect, incidental, special, or consequential damages that result from any product purchased from High Lifter Products. The total
liability of seller to user for all damages, losses, and causes of action, shall not exceed the total purchase price paid for the product that
gives rise to the claim.
Dealers and other Installers
You are responsible for informing your customer and end user of the information contained above and the increased potential hazards of
operating an ATV and/or RUV equipped with modified suspension components. If you install any suspension modifying components, it
is your responsibility to also install the warning label prominently in view of the driver and in prominent view of the driver and passenger
on RUVs and multi-passenger ATVs. They should also be instructed to notify anyone operating the vehicle, as well as any passengers, that
said vehicle is modified.
As discussed above, it is critically important that they be instructed in the need for slower speed operation, regardless of terrain, after this
lift kit is installed.
1