iHealth PO3 Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Peralatan Medis iHealth PO3. iHealth PO3 8 halaman. Fingertip pulse

PRODUCT DESCRIPTION

Pulse oximeter measures the amount of oxygen in your blood and the pulse rate. The

Typically, a SpO2 reading between 96%-99% is considered normal. High altitudes and

other factors may affect what is considered normal for a given individual.

1. Model: PO3

2. Display System: LED

3. Power Source: Battery 3.7V Li-ion 330mAh

4. peak wavelength: 660nm/880nm;

5. SpO2 Measuring Range: 70-99%

Average Root Mean Square(A

definition.

7. Pulse Rate Measuring Range: 30-250bpm

8. Pulse Rate Accuracy:

Automatic Shut-off: After 8 seconds of no indication on the sensors

10.

Operation Environment: 5℃-40℃; Humidity <80%

11.

Storage Environment: -20℃-55℃; Humidity <95%

Cautions

1. Do not use the pulse oximeter in a magnetic resonance(MR) environment.

2. The pulse oximeter might misinterpret excessive movement as good pulse

strength. Limit finger movement as much as possible when using the device.

3. Do not use the pulse oximeter on the same hand/arm when using a blood

pressure cuff or monitor.

4. The pulse oximeter has no alarms and it will not sound if the amount of oxygen in

your blood is low or if your pulse is too high or too low.

oximeter works by shining two light beams into the small

blood vessels or capillaries of the finger, reflecting the

amount of oxygen in the blood and displaying the

measurement on the screen. The oxygen saturation(SpO2)

is measured as a percentage of full capacity.

SpO2 Accuracy: 70-99%, <2 digits; <70%, no

) of

RMS

±2bpm or ±2% larger one