iHeat Roof Mount Solar Hot Water Systems Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pemanas Air iHeat Roof Mount Solar Hot Water Systems. iHeat Roof Mount Solar Hot Water Systems 15 halaman.

Halaman Cetak

SECTION 2

Provision for stainless steel nut and bold.

To be placed through base and stainless strap

Installation Manual - Roof Mount Solar Hot Water - August 2017

Place tank into position, resting the front leg of the base

against the top of the panels. Ensure the centre of the

base is centre of the panels. Tank connections are left

hand only.

TIP: Utilise the centre hole on the base to accurately

position the tank dead centre.

Utilising the 2 stainless steel straps bent at 90 degrees,

insert bolt through the smaller round provisions then

place stainless steel strap through bolt and tighten with

provided nut. Repeat this step for both provisions on

left and right hand side of the base. Then screw the

strap to tin roof through existing batten screw. For tile

roof, strap is be screwed into the truss and then tile re-

seated.

1300 829 118

i-heat.com.au