Dynascan L88 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Transceiver Dynascan L88. Dynascan L88 10 halaman. Pmr-446 handportable transceiver

5.- INSTALLING AND REMOVING THE BATTERY PACK:

Installing the battery pack:

Place the battery pack into battery compartment making sure that it is firmly fixed with the battery

latch.

Remove the battery pack:

Holding the transceiver in one hand, push the battery latch and remove the battery pack of the

transceiver.

1.- Insert the output terminal of the AC/DC adaptor into the DC jack of the desktop battery charger.

2.- Connect the AC/DC adaptor into a nearby and easily accessible 230 VAC wall outlet.

3.- Insert the transceiver with their battery pack into the charging slot, charge the battery with the

transceiver switch OFF.

Battery charger LED indicator:

- Green light: Battery charger standby mode / Battery charged.

- Red blinking: Trickle charge.

- Red light: Charging.

4.- Once the battery charge is complete, remove the transceiver from the desktop charger and

remove the AC/DC adaptor from the 230 VAC wall outlet.

Notes:

- Do not charge the battery pack in a fire or explosion areas.

- The disconnection device of the desktop battery charger is the AC/DC adaptor.

English - 5 -