Autool BT 260 Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Autool BT 260. Autool BT 260 7 halaman. Electric system tester
Halaman Cetak
Test Tool Know-how
Is the Power Scan Probe Tester computer and air bag safe?
The tool LED and LCD pull no more than 1 milliamp of current, therefore when using it as a
test light or multimeter it is computer and airbag safe. However, pressing the power switch is
a different story. When you press the switch forward, you are conducting full battery current
to the tip of the probe. There is a nice safety feature built into the tool. Simply connect the
extra ground lead to the tool and press the power switch forward until it trips the circuit
breaker. This will prevent power from going to the tip but still allow you to use the tool as a
multimeter. When you are away from computer components, simple press the reset button
and you are ready to power up again.
Why do I have no power at the tip when I am pressing the power switch forward but
the red LED is on?
The power switch goes through a lot. It is one of the few things that go wrong with the tool.
The switch is a consumable that needs to be replaced on occasion. We have made it real
simple to not only change it but also buy a new switch. The switch can be snapped out and
replaced in seconds.
You can buy switches from your authorized tool supplier.
The tool with the Rocker Switch slots makes it easy to replace a worn switch in the field
without having to send it in for repair.
Power Switch replacement procedure:
•
Remove the worn switch with a pry tool.
Be careful when applying force.
It is recommended when buying you get two. This will fix your tool now and give you a spare
so you w on' t experience any down time in the future.
•
Make sure to install the switch straight and
press until flush with casing.
11
Warranty and Service
Limited One Year Warranty
AUTOOL warrants to its customers that this product will be free from all defects in materials
and workmanship for a period of one (1) year from the date of the original purchase, subject
to the following terms and conditions:
•
The sole responsibility of AUTOOL under the Warranty is limited to either the repair or, at
the option of AUTOOL, replacement of the test tool at no charge with Proof of Purchase.
The sales receipt may be used for this purpose.
•
This warranty does not apply to damages caused by improper use, accident, flood,
lightning,or if the product was altered or repaired by anyone other than the Manufacturer 's
Service Center.
•
AUTOOL shall not be liable for any incidental or consequential damages arising from the
use, misuse, or mounting of the test tool. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitations may not apply to you.
•
All information in this manual is based on the latest information available at the time of
publication and no warranty can be made for its accuracy or completeness. AUTOOL
reserves the right to make changes at any time without notice.
Service Procedures
If you have any questions, please contact your local store, distributor or visit our website at
www.autooltech.com.
If it becomes necessary to return the test tool for repair, contact your local distributor for more
information.
12