Autool BT760 Panduan Pengguna - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Autool BT760. Autool BT760 13 halaman. Battery system tester

Note:

•

When the battery voltage is lower than the normal test voltage,

the test value cannot correctly determine the battery usage

status, and the test result will display "Charge Retest". At this

time, you need to charge the battery before testing.

•

When the battery voltage is too high or the vehicle is running,

the test cannot be performed normally, it will prompt "The

voltage is too high, please stop the fire! Turn on the headlights

for 3 minutes before measuring".

•

For batteries that are deeply in deficit (such as when the

vehicle is not in use for a long time and the battery is not

charged in time; the lights and car doors are forgotten to be

closed, causing the battery to fail due to severe battery failure

and cannot start the vehicle, etc.), the actual detection process

may also prompt "Please replace the battery". Such a battery,

please consult the battery manufacturer first, and perform the

test after charging and restoring according to the charging

method provided by the manufacturer.

Starter System Test

After the battery test is completed, press the up and down keys to

select the starter system test, and press the OK key to enter the

test state.

In the main menu, press the up and down keys to select the

charging system test. Press the OK key to enter the test. At this

time, start the engine. After waiting for stable operation, press the

OK key to display the test status.