9dot SPI Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Laboratorium 9dot SPI. 9dot SPI 15 halaman.

Installation

With the rack bracket it is possible to install up to 12 modules in an organized manner on a 2U rack.

Quick installation procedure below:

•

(For SPI only) Configure the polarity and mode with the switches.

•

(Optional) Insert the modules on the rack bracket or on the din bar.

•

Wire the power supply (Optional standalone ACDC-48 or ACDC-24 power supplies provided separately by 9dot).

•

Connect the power supply pins of the power supply to each module.

•

(Optional) Insert the rack bracket in the structure used to house the devices.

•

Connect the power supply to the electricity.

In addition, both SPIs and SPPs can be installed using the Din rail mounting clip.

SPI & SPP MANUAL

Figure 5 - din bar Clip

VER. 2 REV. 0