Autool SDT-106 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sensor Keamanan Autool SDT-106. Autool SDT-106 3 halaman.

Smoke output tube: The smoke outlet which connecting with detection port

Power clip: To connect with vehicle battery. The voltage is DC12V.

Cautions:

1. When you use this detector the first time, please fill 20-30ml oil, not beyond

this range.

2. New oil can be filled with only when the smoke is light,and it can't be filled over

15ml every time.

3. Before filling new oil, please pour out the remaining oil in the detector.

4. Please replace the detector oil regularly.

III. Operation

1. Open the engine cover, and hang the detector in the cover.

2. Disconnect the pipe that needs to be connected with detector. If the pipe

needs to be disconnected in the middle. Please secure the other side with a rubber

stopple.

3. Secure this side with proper taper stopple/pipe, and connect it with smoke

output tube.

4. Connect detector with DC12V battery: red with positive, black with negative.

Do not connect in a contrary way.

5. Turn on the power switch, and detector starts to work.

6. In about 3 minutes, the pipe will be filled with smoke. Check the leak points.

Please use head lamp if necessary.

7. After leak detection, please connect well the wires and pipe.

8. Notes:

* Please do leak detection away from smoke-sensitive parts.

* Not suitable for EVAP.

* Do not run the detector over 8 minutes. It needs interval rest.

* The detector has protector. If it exceeds working limit, it will power off

automatically. In this condition, please operate it later.

* The round parts of this detector is with temperature, be careful to avoid

scalding injury.

IV. Maintenance

With longtime high temperature, the smoke and oil will oxidize and deteriorate. It

will infect the service life of smoke generated part, so please change smoke and oil

regularly.

1. Before filling new oil, please pour out the remaining oil in the detector.

2. When the smoke output has water drops, please replace with new oil.

3. Liquid paraffin and baby oil are OK.

4. Please fill new oil with equipped oil bottle