Autopage Car-Pro CPX-RS2 Panduan Instalasi - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Starter Jarak Jauh Autopage Car-Pro CPX-RS2. Autopage Car-Pro CPX-RS2 17 halaman. Remote engine starter

Halaman Cetak
II
FEATURE "
" PROGRAMMING:
1 Turn the Ignition 'switch 'ON/OFF' 3 TIMES and stay in the 'OFF' position.
2 Push the Programming switch 2 times and hold it until the LED turns on and (*) two chirps with a long chirp is heard;
then release the Programming switch. You are now in the feature 'II' programming mode.
3 Press and release the desired transmitter button icon corresponding to the feature you want to program.
(*) The Horn must be connected to hear the programming chirps.
Press
Transmitter
Button
1.
2.
+
3.
+
4.
5.
Exit
: Turn Ignition to the 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
III"
FEATURE "
PROGRAMMING:
1. Turn the Ignition switch 'ON/OFF' 3 TIMES and stay in the 'OFF' position.
2. Push the Programming switch 3 times and hold it until the LED turns on and (*) three chirps with a long chirp is
heard; then release the Programming switch. You are now in the feature 'III' programming mode.
4.
Press and release the desired transmitter button icon corresponding to the feature you want to program.
(*) The Horn must be connected to hear the programming chirps.
Press
Transmitter
Button
1.
2.
3.
Exit
: Turn Ignition to the 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking light flashes will confirm exit.
RS2
One Chirp /
LED one pulse
Factory Default
Setting
Gasoline Engine
20 minutes run time
H2/2 White wire =
Constant Parking
Light Output
Door Lock before
start
0.8-second Door lock
pulses.
One Chirp /
LED one pulse
Factory Default
Setting
Tachometer checking
type.
RPM learning
Start Timer:
0.6-second
Low check level
Two Chirps /
LED two pulse
Diesel Engine and 10
seconds warn-up
timer
10 minutes run time
H2/2 White wire =
Flash Parking Light
Output
Door Lock after start
3.0-second Door
Lock pulse.
Two Chirps /
LED two pulse
Voltage checking type
0.8-second (2 chirps), 1.0-second (3 chirps), 1.2-second (4 chirps),
1.4-second (5 chirps), 1.6-second (6 chirps), 1.8-second (7 chirps),
2.0-second (8 chirps), 3.0-second (9 chirps), 4.0-second (10 chirps),
Hi check level
11
Three Chirps /
LED three pulse
Diesel Engine and 15
seconds warn-up
timer
30 minutes run time
Door Lock before &
after start
Double pulse unlock
Three Chirps /
LED three pulse
Timer checking type
August, 2005
Four Chirps /
LED four pulse
Diesel Engine and 20
seconds warn-up
timer
5 minutes run time
Without this
feature