Autopage CAR-PRO CPX-2350 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Alarm Mobil Autopage CAR-PRO CPX-2350. Autopage CAR-PRO CPX-2350 8 halaman. Professional vehicle security system

Halaman Cetak

First timer:

a. 50 seconds after the system has been triggered. The siren will start

chirping for 15 seconds.

b. During this 15 seconds period of chirping, you will be alerting to push

the valet switch once to turn off the car-jacking feature.

c. If not, it will enter second timer car jacking.

Second timer:

65 seconds after the system has beer triggered. The siren starts

alarming and the parking light starts flashing.

Third timer:

90 seconds after the system has been triggered

a. The siren still alarming and the parking light flashing, and

b. The starter disable will activate to prevent the vehicle from starting.

c. It will remain active until the vehicle's battery power exhausted.

OVERRIDE THE SYSTEM TO TURN OFF CAR JACKING:

Turn the i g nition switch from OFF to ON, and within 10 seconds push

valet switch, the siren will stop and the system disarmed

IGNITION CONTROL DOOR LOCKS. (Programmable)

If the vehicle's door locks have been interfaced to the security system, the

system will automatically lock the vehicle's doors when the ignition is turned

"ON" and /or unlock the vehicle's doors when the ignition is turned "OFF".

TRUNK RELEASE.

Press and hold

control the trunk release or other electric devices.

CAR LOCATOR

Press the

button on the transmitter while the system is armed to active

car locator function. The siren will chirp 6 times. The parking light will flash

12 times, allowing you to easily locate your car.

PROGRAMMING THE REMOTE TRANSMITTER

Enter:

1. Turn the Ignition 'switch 'OFF/ON' 3 TIMES and stay in ON

position. Within 15 seconds.

2. Push the Valet switch 2 times. (Holding in on the 2nd push) until you hear a long

chirp. The transmitter is ready to program.

Program:

1. Press any button on

chirp the first transmitter is now programmed.

2. Press button on the second transmitter until the horn responds with a confirming

chirp, the second transmitter is now programmed.

Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps & 3

parking light flashes will confirm exit.

button on transmitter for three seconds to remote

the transmitter until the horn responds with a confirming