High Street TV StarTastic Buku Petunjuk - Halaman 2

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Proyektor High Street TV StarTastic. High Street TV StarTastic 2 halaman. Holiday motion projector

Halaman Cetak

Please read all instructions prior to use and save instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS:

Before using the electrical appliance, these basic

precautions should always be followed:

1. Read all instructions.

2. This unit is not intended for use by individuals (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning the use of the unit by a person responsible

for their safety. Children should be supervised to ensure that they do not play with the unit.

3. Do not operate the laser projector with the damaged cord or plug.

4. Do not operate the laser projector if it has been damaged in any way.

5. To reduce the risk of electric shock, unplug the laser projector from the outlet when not in use.

6. Do not intentionally shine into eyes or face.

7. Do not attempt to open the housing of LED light under any circumstance.

8. Do not use near infants/cribs and keep away from children.

INCLUDES:

Main unit, adaptor, 12 holiday slides, Stake, Indoor Tripod Stand.

SELECT THE LOCATION FOR STARTASTIC LED PROJECTOR

When picking the location, keep in mind that there should be no visual obstructions between the Startastic

unit and the surface where the projection will show. This will ensure best results. Projection coverage - approx.

40ft distance. When using outdoors always plug into waterproof outlet.

ASSEMBLY AND USAGE

ATTENTION: StarTastic LED projector is intended to

operate in temperatures from -35°C to 37°C.

At or below freezing temperature, it may take approx.

10 min to warm up and reach its full projection strength.

1. Locate the curved piece on the top part of the

stake. Hold the stake so that its angled piece is

pointing directly at the surface for LED projection.

Insert the stake into the ground. Make sure you

insert the pointy end deep enough for unit's stability.

2. Insert the adjustment screw of the stake into the

other side of the Connector opening. Hold the nut

in place with one hand, while turning the knob

clockwise to tighten. See Main Diagram.

3. Loosen the knob to adjust the angle (up or down) of

the LED projector. Tighten the knob to secure the position.

4. Run the extension cord to the projector. Connect to

the unit's plug. You should use the waterproof outdoor

electrical outlet to connect to AC adaptor.

5. When on, the LED projector will appear brightest in

complete darkness, and will appear dimmer in

areas with additional light sources.

• Pressing the ON/OFF switch once, LED projector will

emit fast rotating images in 4 different colors.

• Press the ON/OFF switch twice, LED projector will

emit images slow rotating images in 4 different colors.

• Press the ON/OFF switch 3 times, LED projector will

emit fixed images, no rotation.

• Press the ON/OFF again will turn off.

SIDE VIEW

PLUG

KNOB

ANGLE

ADJUSTER

STAKE

ADAPTOR

HOLIDAY SLIDES

ON/OFF SWITCH

Slides are interchangeable by

(HIGH/LOW

changing the scenes.

SPEED)

Select the scene and place it

into the slide cartridge.

Next, insert the slide cartridge

into the slot of the unit.

MOTION:

To activate motion, press ON/OFF switch

ONCE for high speed or TWICE for low speed.

Press the ON/OFF switch THREE times to

return to non-motion display.

SPECIFICATIONS:

Operation: Outdoor/Indoor

Maximum LED Power: 10W

AC Adapter Power Input: 100 – 240V 50/60Hz Output: DC5V/1.5A

Operating Temperature: -35°C to 37°C

Projection Coverage: 40 feet (distance)

SLIDE SLOT

SLIDE

CARTRIDGE

INTERCHAGABLE

SCENE