Autopage RF-303 Manual Petunjuk Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Pengoperasian untuk Alarm Mobil Autopage RF-303. Autopage RF-303 18 halaman.

NOTE (*) Your vehicle must be equipped with power door locks. Optional

relays may be required.

E. PASSIVE/MANUAL OPERATION (Optional at time of installation)

Passive/Manual operations can be selectable if an optional toggle switch is

installed. Consult your installing dealer.

1. PASSIVE ARMING & DISARMING

If you choose the PASSIVE (Automatic) arming mode, the RF-303 must be

operated as below.

1. Switch OFF the vehicle ignition, exit vehicle, and be sure all protected

openings are closed.

2. The LED STATUS INDICATOR will begin fast flashing and the passive

arming timer will begin counting down.

3. If you re-open the exit, the LED will stop flashing.

4. Close the exit, and the LED will start flashing again.

5. The RF-303 will count down for 30 seconds. After 30 seconds, the vehicle

horn, or siren will chirp one (1) time, and the parking lights will flash one (1) time

indicating the RF-303 has armed.

NOTE: If the optional power door lock feature is installed, the doors will

automatically lock 10 seconds after the PASSIVE arming cycle is completed.

This feature is available only if the ignition control power door lock system is

selected.

6. To DISARM the RF-303, approach the vehicle and press the ON/OFF

button on the remote transmitter. The vehicle horn, or siren will chirp two (2)

times, the parking lights will flash two (2) times, the doors will unlock, and the

LED will turn off. Enter the vehicle and switch on the ignition, or start the engine.