Autopage MA-200 Panduan Pengoperasian - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Keamanan Autopage MA-200. Autopage MA-200 13 halaman. 2-way remote control motorcycle alarm
Juga untuk Autopage MA-200: Panduan Petunjuk Instalasi (8 halaman)

Halaman Cetak

(5 seconds)

Power Save Mode

Clear the Flash Icon and Melody

Sound on the LCD Screen Transmitter

Button Lock ( ) enable / disable

(2-second)

Melody / Vibration

(2-second)

Program Count Down Timer

(2-second)

(10-Minute / 20M / 30 M /1Hour /1.5H /

2.0H)

Enable / Disable Bi Sound

(2-second)

Pressing Button

1. Screen Lamp ON: Press and hold the

screen lamp will turn on for 5 seconds.

2. Power Save Mode For Remote Transceiver: While in the power save mode, the LCD

remote transceiver uses no current to save the battery power.

Entry: Press & hold the

button for 5 seconds, with one melody sound and

icon on the LCD screen to indicate entry the "power save mode".

Exit: Press any button of the LCD remote transmitter to exit the "Power Save Mode".

3. Clear the Flashing Icons and Melody Sound: Pressing the

clear the flashing icons and melody sound on the LCD screen transceiver

4. Stop The Trigger Melody Sound: While the alarm is triggered the LCD screen will alert the user through

a melody sound and flashing trigger icons. Pressing any button on the LCD remote transmitter will stop the

melody sound only.

5. Button Lock:

This is useful if you want to disable the transmission function of the remote control

temporarily to prevent any inadvertent pressing of buttons by others. Press the

button first, within 3 seconds press and hold the

or cancel the button lock function, the

the LCD remote transmitter is on "Button Lock".

6. Vibration / Melody Mode:

This mode is useful when you are in a noisy place and it is difficult to hear the beep sound

from the remote control. The unit will vibrate if your security system is triggered.

Press the

button first, within 3 seconds press and hold the

for 2 seconds to select the mode of vibration or melody, the

on the LCD screen to show the LCD remote transceiver is on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

The unit has a short "bi" sound while pressing the buttons of the LCD screen transceiver.

If you want mute the "bi" sound while buttons are depressed. Press the

(Bi)

press and hold the

button for 2 seconds to disable the "bi" sound.

8. Low Battery Indication:

When the power of the battery weakens, it has two short "bi" sound and the unit will flash

pressing the button of the LCD screen transceiver.

9. Set Up Fixed Count Down Timer:

1. Press the

button first, within 3 seconds press and hold the

LCD screen will shows

icon and timer (ie. 0:10) ,

F ( )

2. Press the

button again showing next order time on the screen ( ie.0:20), press them again

MA-200 OP REV.A

Press and hold the

5 seconds, 1 melody sound to

confirm entry.

Press the

within 5 seconds

Press the

seconds press and hold

for 2 seconds.

Press the

(

)

Mode

seconds press and hold

for 2 seconds.

Press the

(

)

seconds press and hold

for 2 seconds.

Press the

(Bi)

While

seconds

button for 2 seconds.

button for one second, with one melody sound and the LCD

button 3 times within 3 seconds will

( )

button for 2 seconds to activate

icon will displayed on the LCD screen to show

(

) button

icon will displayed

F ( )

button for 2 seconds, the

Oct/23/2006

button for

button 3 times

button first within 3

button

button first within 3

button

button first within 3

button

button first within 3

press

and

hold

button first, within 3 seconds

icon while