Autopage RF-525 Panduan Pengoperasian - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Keamanan Autopage RF-525. Autopage RF-525 20 halaman. Professional 2-way lcd 6 channel security system with two-way serial port data link

Halaman Cetak

Screen Lamp ON: Press and hold the

one melody sound and the LCD screen lamp will turns on for 5 sec.

Power Save Mode: While the power save mode, the LCD remote

transceiver uses "0" current to save the battery power.

Entry: Press & hold the

sound and

icon on the LCD screen to indicate entry the

"power save mode".

Exit: Press any button of the LCD remote transmitter to exit the

"Power Save Mode".

Clear the Flash Icon and Melody Sound: Press the

seconds will clear the flash icon and melody sound on the LCD screen transceiver

Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will

alert user through melody sound and flashing trigger icon, press any button on the

LCD remote transmitter to stop melody sound only.

Button Lock: It is useful if you want to disable the transmission

function of the remote control temporarily to prevent from any

inadvertent pressing of buttons by others. Press the

within 3 seconds press and hold the

activate or cancel the button lock function, the

on the LCD screen to show the LCD remote transmitter is on "Button

Lock".

Vibration / Melody Mode:

It is useful when you are in a noisy place and difficult to hear beep

sound from the remote control as the remote control in this mode,

vibrates itself if your security system is triggered.

Press the

button first, within 3 seconds press and hold the

(

) button for 2 seconds to select the mode of vibration or melody,

the

icon will displayed on the LCD screen to show the LCD

remote transceiver is on vibration mode.

Enable / Disable Bi Sound While Pressing Button:

It has a short "bi" sound while pressing the button of the LCD screen transceiver

If you want mute the "bi" sound mute always while press button. Press the

first, within 3 seconds press and hold the

"bi" sound.

Low Battery Indication:

When the power of the battery weakens, it has two short "bi" sound and flash

icon while pressing the button of the LCD screen transceiver.

button one second, with

button for 5 seconds, with one melody

( ) button for 2 seconds to

icon will displayed

(Bi) button for 2 seconds to disable the

button 3 times within 3

button first,

button