Autopage RF-525 Panduan Pengoperasian - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Keamanan Autopage RF-525. Autopage RF-525 20 halaman. Professional 2-way lcd 6 channel security system with two-way serial port data link

Halaman Cetak

Congratulations on your purchase of the RF-525LCD vehicle security system. We

sincerely hope the purchase of the RF-525 security system gives you peace of mind.

The RF-525 LCD is a state-of-the-art two-way communication system. Please take

the time to read over this manual to thoroughly familiarize your self with the many

features and options of the RF-525.

Auto Page, Inc. has over 27 years of experience in the vehicle security industry in the

United States and is a wholly owned subsidiary of Iwata Electric Co., of Tokyo, Japan.

Iwata has been an industry leader for over 50 years, establishing a reputation for

ingenuity in its engineering capability and innovative communication products. Auto

Page and Iwata maintain a long tradition of providing the best value to their

customers.

TRANSMITTERS

The RF-525 comes with two transmitters. The XT-72LCD is a 2-way transmitter and

receiver, also referred to as a transceiver. The XT-65 is a mini-size 1-way transmitter.

Both operate on the AM band with a code-rolling feature that will prevent any illegal

use of a code-grabber attempting to record and steal the codes of your transmitter.

CHANGING THE BATTERY IN YOUR TRANSMITTERS

XT72LCD: This transmitter uses a standard 1.5-volt AAA battery. Information on

changing the battery can be found on page 12 of this manual.

XT-65: This transmitter uses one 3-volt lithium ion batteries (#CR2032). To replace

the battery, you will need to use a small flat blade screwdriver. Remove the screw

and locate the small notch on the lower right side of the transmitter case next to the

key ring. Using the flat blade screwdriver, carefully pry the top case from the bottom

case. It should snap apart after breaking the seal. Before removing the batteries

note the direction of the positive (+) terminal. Place the new batteries in exactly the

same manner, being careful not to bend or damage the contact terminal. Snap the

cases back together and then test the transmitter to insure it arms and disarms the

alarm.

XT-65 Extended Range Sliding Cover remote

CR2032 3-Volt Battery