High Tech IVC-45L Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Penyedot Debu High Tech IVC-45L. High Tech IVC-45L 12 halaman. Industrial vacuum cleaner

When the machine is not in use, first gently lift the machine to pull out the spring

latch, then press the machine down to the lowest position,the spring latch will be

inserted into the control panel rack,keep the machine from floating.

The package size is as follows.

lmproper operation may lead to the vacuum cleaner overturned and damaged,

even endanger personal safety.

When the spring bolt is pulled out (inserted in), it may get stuck. At this time, you

only need to press the machine down (upward) and then you can pull out the spring

pin (insert it). When the spring pin is pulled out, it may get stuck. Just press the

machine down (up) and then you can pull out (insert) the spring bolt.

Be ca refuI when the vacuum cleaner is adjusted to the position of transportation

and there is a risk of crushing injury.

Dust inhalation is harmful. Please bring a professional mask during operation to

ensure physical safety.

4.3 Connection of hose and vacuum cleaner

The IVC-45L is equipped with an 80mm connector, which can quickly and safely

connect the grinder and the vacuum cleaner.

l.Connect the vacuum cleaner to power supply. Use cables suitable for vacuum

cleaners (see technical data for minimum cable area).

Start the vacuum cleaner:Rotate the emergency switch, press the start button.

2.Stop the vacuum cleaner:Press the emergency stop switch to stop the equipment.

The sliding valve is installed between the cyclone separation barrel and the filter

element barrel. When the sliding valve is opened, the air filtered through the cyclone

separation barrel will be filtered through the filter element barrel for a second tim e.