Emerson DIXELL XWEB1000D PRO Petunjuk Pemasangan dan Pengoperasian - Halaman 4
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Pengoperasian untuk Alat Ukur Emerson DIXELL XWEB1000D PRO. Emerson DIXELL XWEB1000D PRO 20 halaman.
Juga untuk Emerson DIXELL XWEB1000D PRO: Petunjuk Pemasangan dan Pengoperasian (19 halaman)
Halaman Cetak
CAUTION
CAUTION
1.
PRODUCT DISPOSAL (WEEE)
With reference to the DIRECTIVE 2012/19 / UE OF THE EUROPEAN PARLIAMENT AND OF THE
COUNCIL of 4 July 2012 on Waste Electrical and Electronic Equipment (WEEE), and to the relevant national
implementation regulations, we inform you that users of EEE in households:
➢ there is an obligation not to dispose of WEEE as mixed urban waste and to separate waste collection of
WEEE;
➢ Public or private collection systems required by local laws must be used for disposal. It is also possible,
at the end of its life, to return the equipment to the distributor in case of purchase of a new one.
➢ This equipment may contain hazardous substances; improper use or incorrect disposal could have
negative effects on human health and the environment.
➢ The symbol
with separate waste.
➢ In case of incorrect disposal, sanctions can be applied as established by the local laws on waste
disposal.
2.
THE RECIPIENTS OF THIS MANUAL
The contents of this manual are intended for professional users, such as XWEB installers. It may also be of
use to the administrator of the network that it is connected to.
The mechanical product drawings required for any form of intervention and the possible network
configurations are all an integral part of this manual.
1592010820 XWEB5000 PRO STP GB r1.0 18.03.2022.docx
The customer shall bear full responsibility and risk for product configuration in order
to achieve the results pertaining to installation and/or final equipment/system. Upon
the customer's request and following a specific agreement, Dixell s.r.l. may be
present during the start-up of the final machine/application, as a consultant,
however, under no circumstances can the company be held responsible for the
correct operation of the final equipment/system.
Since Dixell products form part of a very high level of technology, a
qualification/configuration/programming/commissioning stage is required to use
them as best as possible. Otherwise, these products may malfunction and Dixell
cannot be held responsible. The product must not be used in any way that differs
from that stipulated in the documentation
shown on the product or on the packaging indicates that the product must be treated
XWEB5000 PRO
4/20