Galeski CONTOUR CAT KS 80/3 Panduan Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sander Galeski CONTOUR CAT KS 80/3. Galeski CONTOUR CAT KS 80/3 13 halaman. Wet edge polisher

Halaman Cetak

1. Technical Specifications

ENGLISH • Operating Instructions CONTOUR CAT KS80/3

3.2 Mains (Power-) Connection

(Additional safety advice!)

As the machine is to be used with water, it

must only be operated with an isolating

(safety-) transformer or in connection with

the personal safety-switches "PRCD".

The personal safety-switch is to be

checked as follows before every opera-

tion:

(a) Operate switch "ON" while power plug is

connected to main power supply - red opera-

tion-light comes on.

(b) Operate "TEST"-key - personal safety

device switches off, red operation-light

comes off.

should now be operating.

(d) Should the personal safety switch not

come on in this routine, or should it switch

off repeatedly when machine is in operation,

the whole combination of devices must be

checked.

The voltage shown on the machine-label

must correspond with your local power sup-

ply.

4. Switching on and off

Switching on: Push the red switch forward

and upward.

Switching off: To unlock, press the grey

part of the switch upward. The switch will

automatically move back to "0".

5. Electronic Device

The speed of rotation is adjusted electroni-

cally when the load increases.

In case of a longer overload period the

speed is decreased electronically. The ma-

chine continues to run slowly to cool down

the motor coil. After switching off and on, the

machine can be used at rated load.

The duration of cooling-down period

depends on the grade of overload.

Under the effect of extreme electro-magnetic

interferences from the outside, temporary

variations in the speed of rotation could arise

in particular cases.

6. Smooth Start

The electronic smooth start feature

prolonges the life of both motor and gear,

power input at start-up is reduced by approx-

imately half.

7. Accessories

Please refer to our catalogue for a range of

accessories along with order-numbers.

8. Service

Keep the machine and the ventilation slots

clean.

Use only GALESKI accessories and spare

parts. Should components need to be ex-

changed which have not been described,

please contact GALESKI company.

If needed, a listing of the machine parts with

picture can be requested from GALESKI

company. Please indicate machine type and

serial-number found on rating label of ma-

chine.

9. Using the Machines

Carefully consider information given by tool-

manufacturer as to proper tool-speed.

We do not accept liability for any damage

caused by operating tools with improper

speed.

Never use machine for any dry grinding

or polishing! (The sealing rings need wa-

ter for cooling.)

Handling:

1. Step: Shaping

First mount the pre-milling cylinder GADIA

CYLI G 50 (coarse). Turn speed adjustment

wheel to pos. G. Adjust the position of the

cylinder in relation to the slab by means of

height adjustment, taking into account oscil-

lating movement of cylinder when mounted

on grinding head "RS".

To watch the oscillating motion during stand-

still of the machine, fix the working spindle

(10) by the spindle lock (1) and turn the

cylinder body manually.

The coating of the cylinder should cover the

entire slab thickness. Open and adjust the

water supply, switch the machine to on and

start working with steady, even right/left mo-

tions until the desired shape is reached.

Work over same area again briefly with pre-

– 8 –

GALESKI WERKZEUGE