ACTON Blink S2 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kontrol Jarak Jauh ACTON Blink S2. ACTON Blink S2 8 halaman.

Red = Charging

Charging the skateboard is indicated by the LED indicator on the charger. The LED

will turn from red to green as it ﬁ nishes char

A fast blinking light on the remote is an indication if the remote is in low battery.

IV. CARE &MAINTENANCE

Clean the surface of ACTON BLINK® S2 with a damp, but not overly wet, soft cloth

only. Store ACTON BLINK® S2 in an indoor and cool environment. Recharge the

battery at least once per month and avoid contacting with volatile liquids including

Alcohol or strong cleaning agents.

V. TROUBLESHOOTING

If your ACTON BLINK® S2 is not running properly, stop using it immediately. In most

cases, turning the skateboard off for 10 seconds and restarting it will solve the issue. If

you find other problems or restarting the ACTON BLINK® S2 doesn't resolve the issue,

refer to the following chart for common troubleshooting methods. If the problem still

exists, please stop using the ACTON BLINK® S2 and contact ACTON.

Symptom

Won't turn on

Won't go

Won't charge

Range t oo low

Probable Cause

Low Battery

Bluetooth not connected

Remote lose re-sync

Charger not connected

Battery depleted

Exceed the weight limit

Battery health dropped

Solution

Charge battery for at least 1 hour

Restart the remote and BLINK S2

Please refer to resync manual to

resync the remote

Make sure you are using the correct

charger and it is properly connected

If battery has not been charged for

MORE than one month, it may REQUIRE

an extra hour before it will recharge

ACTON BLINK S2 is designed for a

person who weighs up to 250lbs

May need to replace the battery pack

being