HIGH VOLUME O2 HVO GO+GO NAKED Setup Manual - Halaman 15

Jelajahi secara online atau unduh pdf Setup Manual untuk Drone HIGH VOLUME O2 HVO GO+GO NAKED. HIGH VOLUME O2 HVO GO+GO NAKED 16 halaman.

Halaman Cetak

Step 10: Power Up!

● Turn all of the oxycon power switches on, and leave them on at all
times. At this point,
is turned on.
● Turn the master power switch on. Now the system should come to
life. You should see the lights on the oxycons turn on, and you'll
hear the compressors running in both the master and the drone.
● Watch the analog pressure gauge. In a few minutes you should see
pressure building up.
● Once there is visible pressure, begin testing all fittings for leaks
using a sprayer with soapy water.
off, Drain the tanks, fix the leak, and try
the oxycons will not power up
If you find a leak, turn the system
until the master
again.
15