Dynasty Fireplaces DY-BEF57 Petunjuk Pemasangan & Panduan Pengoperasian Pemilik Rumah - Halaman 4

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan & Panduan Pengoperasian Pemilik Rumah untuk Perapian Dalam Ruangan Dynasty Fireplaces DY-BEF57. Dynasty Fireplaces DY-BEF57 15 halaman.

Halaman Cetak
WARNING
 WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK---DO NOT USE THIS
HEATER WITH ANY SOLID STATE SPEED CONTROL DEVICES.
 For residential use only! NOT for commercial use! Any commercial or public use of
this heater voids all warranties, and could cause injury.
 This product is not intended to be a primary heat source. It is for supplemental heat
only.
 INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric
shock!
 Risk of electric shock! DO NOT OPEN! No user-serviceable parts inside!
 NEVER modify this heater.
damage. Modification of this fireplace completely voids all warranties.
 ALWAYS turn this heater off before unplugging it from the outlet.
 ALWAYS disconnect this unit from the power supply before performing any assembly
or cleaning, or before relocating the electric fireplace.
 NEVER leave this heater unattended. ALWAYS unplug this heater when not in use.
 ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become
wet.
 ONLY use this heater on a 120V AC 15-Amp circuit. NEVER overload the circuit. If
this heater trips the circuit breaker, unplug all other appliances on the same circuit before
the next use. Avoid plugging other appliances into the same circuit as this heater.
 NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or
connections. Plugging this heater into a faulty outlet could result in electric arcing
within the outlet that could cause the outlet to overheat or catch fire.
 ALWAYS check your heater cord and plug connections with each use!
a. MAKE SURE the plug fits tight in the outlet! Faulty wall outlet connections or loose plugs
can cause the outlet to overheat.
b. Heaters draw more current than small appliances. Overheating may occur even if it
has not occurred with the use of other appliances.
c. During use check frequently to see if the plug outlet or faceplate is HOT! If the outlet
or faceplate is HOT, discontinue use immediately and have a qualified electrician
inspect and/or replace the faulty outlets.
 This heater has a polarized plug (one blade is wider than the
other). As a safety feature to reduce the risk of electrical shock,
this plug is intended to fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to
defeat this safety feature.
SAVE THIS INSTRUCTION!
Doing so could result in personal injury or property
4