High-Flying HF-LPD100 Panduan Pengguna - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Router Nirkabel High-Flying HF-LPD100. High-Flying HF-LPD100 16 halaman. 802.11a/b/g/n wifi module
Halaman Cetak
1.
Applicable FCC rules
This module is granted by Single Modular Approval. It complies to
the requirements of FCC part 15.247 and 15.407
2. The specific operational use conditions
This module can be used in IoT devices. The input voltage to the module is
nominally 2.1~3.46V DC. The operational ambient temperature of the module is
–40 °C ~ 65 °C. Only the embedded PCB antenna is allowed. Any other
external antenna is prohibited.
3. Limited module procedures
N/A
4. Trace antenna design
N/A
5. RF exposure considerations
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body. If the equipment
built into a host as a portable usage, the additional RF exposure evaluation may
be required as specified by 2.1093.
6.
Antenna
Antenna type: PCB antenna
Label and compliance information
7.
An exterior label on OEM's end product can use wording such as the following:
"Contains Transmitter Module FCC ID: 2ACSVHF-LPD100" or
"Contains FCC ID: 2ACSVHF-LPD100."
OEM Guidance
Peak gain: 0dBi