GalileoSky v 5.0 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS GalileoSky v 5.0. GalileoSky v 5.0 10 halaman. Switching on devices for the first time

Halaman Cetak

Switching on Galileosky 5.0, 5.1 Devices for the First Time

version 6 dated from June 19, 2018

Preparing of Device via the

Configurator

Before using Galileosky devices you have to configure them with the help of service

software "Configurator" (hereinafter – the Configurator). The order of downloading and

installation is the following:

Turn on the Windows-based computer and go to the Galileosky web-site using the



following link

https://galileosky.com/podderzhka/programmyi.html

Download the latest version of the Configurator;



Install the Configurator on the computer with administrator rights;



Authorize the Configurator to work through the Internet in operating system settings;



After installation of the Configurator you can start device settings:

Apply the voltage from 12V to the tracking device and connect it to the computer via



USB cable;

ATTENTION!

The power is not fed through USB-interface. The device must be connected

to the external power supply.

Start the Configurator and move to "Settings" tab -> "Data transmission" tab (Pic.



10);

Set APN of the chosen cellular service provider;



Configure the data processing monitoring server and the port through which it works;



press "Apply" button;



Reboot the device by pressing the "Restart the device" button in the "Device" tab of



the Configurator.

Pic. 10

Data transmission setting