Highendled YLC-004 Petunjuk - Halaman 4
Jelajahi secara online atau unduh pdf Petunjuk untuk Pengontrol Highendled YLC-004. Highendled YLC-004 5 halaman. Dmx multi function controller
Halaman CetakPress "DMX" again to set DMX address or choose DMX P1 or DMX P2.
Press "+" or "-" to choose DMX P1 mode or DMX P2 mode.
When it is in any mode:
you can set DMX address via "S" "0" "1" "2" "3" "4" "5" "6" "7" "8" "9" buttons for
the LED lights by pressing these buttons.
For example,
set DMX address "245"
Press "S" button, then the red LEDs are on, it means you can start to set address.
Press "2" button, then the green LEDs are on, it means"2"(hundreds place) setting
successful.
Press "4" button, then the blue LEDs are on, it means"4"(tens place) setting
successful
Press "5" button, then all the R/G/B LEDs are on, it means"5"(ones place) setting.
If all the RGB LEDs flash twice, then the DMX address setting successful, and
DMX address will be memorized automatically.
If the input is not correct, Red LEDs will flash twice and be ready to input the correct
ones. If you want to give up DMX address setting, press "S" button again or other
keys, then exit DMX address setting.
DMX Value as follows:
MODE
Built-in 128 colors for
P1
P2
6, Sound mode
Operation by DMX Multi function controller
Press "MODE" to select DMX mode.
Set sensitivity level for sound-controlled mode via "UP/DOWN" buttons.(SU:
00-31)
Operation by IR remote
Press "SA" to select SOUND mode.
Adjust the sensitivity level (SU: 00-31) via "+" or "-".
CH1
RGB
choice
dimming
RED
GREEN
DMX CHANNEL
CH2
CH3
strobe
BLUE
dimming
CH4
CH5
Fade
No use
No use
time
RGB
Strobe
CH6
Fade
time