Afinia L801 Panduan Petunjuk Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Pembuat label Afinia L801. Afinia L801 6 halaman. Rewinder
Juga untuk Afinia L801: Panduan Penyiapan dan Pemasangan Cepat (8 halaman)

Halaman Cetak

4. Insert a straightened paperclip into the hole on the side with the power switch and two LEDs. This will engage a

button inside the rewinder. Keep the button pressed and turn on the device. The yellow LED will be flashing.

Remove the clip.

5. Raise the tension arm a small amount, so it is just off the base. Insert the paper clip and press the button. Now

both LEDs should be flashing.

NOTE: This will set the lowest position of the tension arm, with maximum speed.