Galiso HDD-8RB Buku Petunjuk - Halaman 6

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pengering Galiso HDD-8RB. Galiso HDD-8RB 12 halaman. With digital control
Juga untuk Galiso HDD-8RB: Panduan Petunjuk Pemasangan/Pengoperasian (14 halaman)

Halaman Cetak
PART 3 INSTALLATION
Read all instructions and familiarize yourself with the installation blueprints
1.
before attempting to install or operate the HDD-8RB Cylinder Drier.
2.
Carefully uncrate the HDD-8RB Cylinder Drier and remove all packing materials.
3.
To facilitate assembly, lift upper body to install the three legs. Lower to the floor.
4.
Bolt the motor to the leg brackets and assemble the muffler.
5.
Take cover off the thermostat control box. Fasten conduit elbow to the control
box and connect lead wires to the magnetic starter, per schematic in the back
of this manual.
6.
Position the drier in its permanent place and bolt to the floor.
7.
Connect to the power supply and test for proper direction of motor rotation by
checking for air exhaust at the manifold outlets.
8.
Close the control box cover.