Dynatech T-25UD Petunjuk Penggunaan dan Pemeliharaan Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Penggunaan dan Pemeliharaan Manual untuk Kelistrikan Industri Dynatech T-25UD. Dynatech T-25UD 9 halaman. Ucm unit
Juga untuk Dynatech T-25UD: Petunjuk Penggunaan dan Pemeliharaan Manual (8 halaman), Petunjuk Penggunaan dan Pemeliharaan Manual (9 halaman)

SD-Box + Star A3 Beta+ ASG 1XX + T-25 Instruction Manual

Code: DYN 62.06.00

Date: 25/02/2020

FIGURE 3: Star Governor + ASG 1 XX Safety Gear + T-25 Steering mechanism

FIGURE 4 displays the Star governor's Beta parking system. It is mainly made up of a coil, which operates the

governor's interlocking system in case of UCM, and an inductive sensor, which indicates the interlocking system's

positioning to the SD-BOX.

The protection of this system against UCM is as follows: The SD-BOX electronic system compares, at all times, the

status of the car doors and the floor level via input signals from the installation. These signals are:

•

Doors closed.

•

Floor level or unlocking zone.

•

Motor contactor signal.

N.B.: Please check the electrical characteristics in the SD-BOX manual in order to verify the voltage of the signals to

be entere, as well as their nature.

By using these inputs, if the SD-BOX detects that the car leaves door level with doors open, the contactor in the

safety line is activated, which causes the Star A3 Beta governor's parking system coil to de-energise. This will make

Note: This manual displays partial information on the instructions for use and maintenance of this product. Please refer to the customer

area in Dynatech's website in order to consult the full manual; http://customers.dynatech-elevation.com/

Revision: 00

FIGURE 4: Star A3 Beta Governor