Autoquip III Series Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Mesin Autoquip III Series. Autoquip III Series 12 halaman. Piston air engine
Halaman Cetak
Reassembly
1. Ensure all parts are clean and grit free
2. Insert replacement piston/liner/seal assemblies ensuring that the seal
is at the cylinder cap end.
3. Fit the O Ring in the groove on cylinder depending on the type.
4. The three exposed ports of the air flow route (1 on each cylinder)
must be protected to prevent any ingress of dirt/grit. This is critical.
www.aqautomation.com