HighGear Enduro mini Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Menonton HighGear Enduro mini. HighGear Enduro mini 17 halaman. Techtrail running wristware
Halaman CetakSETTING THE WATCH FUNCTIONS
SETTING THE TIMERS
Enduro watches are equipped with 3 independent 24-hour Timers with enhanced
functionality. In TIMER MODE, you can scroll through Timers 1 through 3 by
PRESSING
the
STOP/NEXT
key.
Timer options are:
CD-STOP: Counts down, then stops at 00:00:00.
CD-REPEAT: Counts down, then automatically starts to count down again.
CD-UP: Counts down, then automatically begins counting up. Example: you can
program a 10-minute warm up followed by a 45-minute workout. The timer counts down
10 minutes, then begins timing like a regular chronograph.
TRAIN: Trainer mode has up to 9 settable segments. The length of each segment
can be set independently. Each segment counts down to 00:00:00 and automatically
advances to the next segment which begins counting down immediately in a continuous
loop.
19
SETTING THE WATCH FUNCTIONS
SETTING THE TIMERS
(
CONTINUED
In Timer mode:
1.
Select TIMER 1, 2 or 3 by
PRESSING
2.
PRESS & HOLD
the
SET/CLEAR
sequence.
3.
Select TIMER MODE (CD-STOP, CD-REPEAT, CD-UP or
TRAIN) by
PRESSING
the
START/LAP
keys.
4.
Advance to set HOURS by
PRESSING
Adjust by
PRESSING
the
START/LAP
5.
Advance to set MINUTES by
PRESSING
Adjust by
PRESSING
the
START/LAP
6.
Advance to set SECONDS by
PRESSING
Adjust by
PRESSING
the
START/LAP
7.
PRESS SET/CLEAR
to exit the setting sequence.
(
)
CONTINUED NEXT PAGE
)
the
STOP/NEXT
key.
key to enter the setting
or
STOP/NEXT
the
MODE
key.
or
STOP/NEXT
keys.
the
MODE
key.
or
STOP/NEXT
keys.
the
MODE
key.
or
STOP/NEXT
keys.
20