HighGear FitWare Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pedometer HighGear FitWare. HighGear FitWare 11 halaman. Fitware series

FitWareIM

3/24/05

CHANGING THE BATTERIES

1. The FitWare units are powered by CR2032 3v

Lithium batteries. These batteries are very common

and can be found at most drug stores and camera

shops.

2. The FitWare and FitWare Pulse use a single battery.

3. The FitWare FM uses a pair of batteries.

FITWARE AND FITWARE PULSE

1. Remove battery door using a coin or other small

object.

2. Remove the old battery.

3. Install the new battery Positive (+) side up.

4. Replace and tighten battery door.

FITWARE FM

1. Remove battery door using a coin or other small

object.

2. Remove old batteries.

3. Install new batteries.

a. The bottom battery should be installed Positive (+)

side down and must be placed under the two small

metal prongs located in the lower right corner of the

battery compartment.

b. The top battery must be installed Negative (-)

minus side down.

4. Replace and tighten the battery door.

FITWARE SERIES

1:53 PM

Page 18

1. Avoid Extreme Temperatures.

2. Clean your FitWare unit using a soft dry cloth.

3. Store your FitWare unit in a cool, dry place when not

4. Cold temperatures may cause the display to dim or

5. Store this manual in a safe place for future

NEVER use any type of chemical cleaning agent on

the unit.

in use.

fail completely. Normal operation should return

when the unit warms up.

reference.

FitWare

Pulse