AFINIBOT A1 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Printer 3D AFINIBOT A1. AFINIBOT A1 19 halaman.

Step 11 Insert the Sliding Rods.

 Insert the 6pcs Sliding rods to the Motor_end, ensure

the same height of each sliding rods. Then locking the

18pcs M3*14mm screws.

 Through the Carriage to each sliding rod, attention

the cooling fan 1 is on the right side.

Cooling fan 1 is on the right side

Ensure the same

height of each sliding

Carriage

M8*525mm

Sliding rod

M3*14mm inner

hexagon screws*18

Motor_end

Base plate