Dynaudio LYD 7 Panduan Pengoperasian - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pembicara Dynaudio LYD 7. Dynaudio LYD 7 13 halaman. Lyd series.
personal reference monitor
Juga untuk Dynaudio LYD 7: Panduan Pengoperasian (13 halaman)
Halaman Cetak
Dynaudio LYD Series
Vertical angle
An easy method to do this involves the tape
measure and string. With the tape measure, check
The vertical angle of the speakers should orient the loudspeaker directly toward the listener's ear level. If
to see that the speakers are not placed further
the speaker is placed higher than the listener, they should be angled downward. Conversely, if the speaker
away than 2 meters for the best response.
is below the listener's ear level, they can be angled upward to point at the ear as shown in Figure 6.
1. Once you have initially placed the
speakers, take the string holding one end at
the speaker's acoustic axis and stretch it out to
the listening position.
2. Mark this point with a marker.
3. Do this again for the other speaker to
ensure that they are both the exact same
distance from the listener.
4. Use the string to measure the distance
between each speaker. This should also be
the same, forming and equilateral triangle
between the two speakers and the listener.
5. Make adjustments as necessary to place
the listener and speakers at the same distance
Figure 6: Listening angle vertical
from each other
14
Personal Reference Monitor
Positioning the speakers
15