Dynaudio LYD 8 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pembicara Dynaudio LYD 8. Dynaudio LYD 8 13 halaman. Lyd series. personal reference monitor
Juga untuk Dynaudio LYD 8: Panduan Pengoperasian (13 halaman)

Halaman Cetak

Dynaudio LYD Series

Important

The lightning flash with an arrowhead symbol

within an equilateral triangle, is intended to alert

safety

the user to the presence of uninsulated "danger-

ous voltage" within the product's enclosure that

may be of sufficient magnitude to constitute a

information

risk of electric shock to persons.

1. Read these instructions.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug. A

2. Keep these instructions.

polarized plug has two blades with one

wider than the other. A grounding type

3. Heed all warnings.

plug has two blades and a third ground-

ing prong. The wide blade or the third

4. Follow all instructions.

prong are provided for your safety. If the

provided plug does not fit into your outlet,

5. Do not use this apparatus near water.

consult an electrician for replacement of

the obsolete outlet.

6. Clean only with dry cloth.

10. Protect the power cord from being

7. Install in accordance with the manu-

walked on or pinched particularly at plugs,

facturer's instructions.

convenience receptacles, and the point

where they exit from the apparatus.

8. Do not install near any heat sources

such as radiators, heat registers, stoves,

11. Only use attachments/accessories

or other apparatus (including amplifiers)

specified by the manufacturer.

that produce heat.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

product.

12. Use only with the cart, stand, tri-

pod, bracket, or table specified by the

manufacturer. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip- over.

13. Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14. Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as powersupply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

Personal Reference Monitor

Warning!

The mains plug of the power supply shall remain

readily operable.

To reduce the risk of fire or electrical shock, do not

expose this equipment to dripping or splashing

Do not install in a confined space.

and ensure that no objects filled with liquids, such

as vases, are placed on the equipment

Do not open the unit – risk of electric shock inside.

This apparatus must be earthed.

Caution:

You are cautioned that any change or modifica-

Use a three wire grounding type line cord like the

tions not expressly approved in this manual could

one supplied with the product.

void your authority to operate this equipment

Be advised that different operating voltages

Service:

require the use of different types of line cord

There are no user-serviceable parts inside.

and attachment plugs.

All service must be performed by qualified per-

Always observe the local safety regulations.

sonnel.

Ensure that the factory-set power requirements

for the device (refer to the label on the back of

EMC/EMI

the monitor) corresponds to the mains supply

in your region.

This equipment has been tested and found to

This equipment should be installed near the

comply with the limits for a Class B Digital device,

socket outlet and disconnection of the device

pursuant to part 15 of the FCC rules.

should be easily accessible.

These limits are designed to provide reasonable

To completely disconnect from AC mains, dis-

protection against harmful interference in resi-

connect the power supply cord from the AC

dential installations. This equipment generates,

receptacle.

uses and can radiate radio frequency energy

and, if not in- stalled and used in accordance

Important safety information

with the instructions, may cause harmful interfer-

ence to radio communications. However, there

is no guarantee that interference will not occur

in a particular installation. If the equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off an on, the user is encouraged

to try to correct the interference by one or more

of the following measures.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment

and receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

Consult the dealer or an experienced radio/TV

technician for help.

For customers in Canada:

This Class B digital apparatus complies with

Canadian ICES-003.

Cet appareil numérique de la classe B est con-

forme à la norme NMB-003 du Canada.