Dynaudio S4-LCRMT Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembicara Dynaudio S4-LCRMT. Dynaudio S4-LCRMT 9 halaman. Studio series. s4-lcr series

Halaman Cetak

1. Introduction

This manual describes the installation of S4-LCR Series modules

within drywall/plasterboard walls. It begins by listing the carton

contents and continues information specific to installing in-wall

speakers.

If this is your first time working with Dynaudio Studio Series

custom install speakers, or if you have not done so for a while, we

recommend that you read the appropriate sections of this manual

before you begin.

Note: Visit dynaudio.com for the latest Studio Series news and

information.

The S4-LCR Series is designed to provide very high quality left,

centre, and right channel audio in custom installations where

speakers are required to be fitted flush in walls. The S4-LCR Series

not only benefits from four decades of Dynaudio speaker expertise

but has been designed through its modular format to offer enhanced

versatility in terms of both practical installation and acoustic

performance.

S4-LCR Series modules comprise a Speaker Unit and Installation

Frame. The Installation Frame is inserted into the wall cut-out and

securely fixed in place using auto-locking clamps. The Speaker Unit

is then connected to the speaker cables before being inserted into

the Installation Frame to be held in place by a latch system. The grille

is then fitted, secured by magnets integrated within the Installation

Frame.

• S4-LCR Series modules are uniquely simple to install. Once a

wall cut-out is created, no tools are required and installation can

be completed by one person without assistance. Every element

of the S4-LCR Series installation procedure, from unpacking the

speakers to painting and fitting the magnetic grilles is simplified

and streamlined by design.

• S4-LCR Series speakers employ numerous Dynaudio

technologies, borrowed from the company's studio monitors and

high-end hi-fi speakers, to bring genuinely high performance

audio to custom installations: unique bass/mid drivers with large

diameter aluminium voice coils and finite element optimised, low-

distortion magnet systems, proprietary MSP (Magnesium Silicate

Polymer) diaphragms, and precision coated soft dome tweeters

with powerful neodymium magnets are just a few examples

among many.

• The S4-LCR Series comprises two modules:

the S4-LCRMT mid/tweeter module and the S4-LCR65W twin

driver bass module. A single S4-LCRMT module can be used

with one or, for higher volume level applications, two S4-LCR65W

modules.

• S4-LCRMT sensitivity can be adjusted via a rear mounted switch

to match either one or two S4-LCR65W modules. The electrical

crossover between S4-LCRMT and S4-LCR65W modules can

be accomplished passively, using either the standard internal

passive filters, or actively using external active filter components.

Switches and bypass jumpers located on the rear of the speaker

units engage or bypass the internal passive bass module low

pass and mid/tweeter high pass filters.

• Each S4-LCR Series module is supplied with a pair of Installation

Frame Flanges. With frame flanges fitted, modules can be

installed individually and spaced apart. With one or both frame

flanges removed, multiple modules can be consolidated and

installed in a common wall cut-out.

• S4-LCRMT modules are intended to be installed only in portrait

orientation, however S4-LCRMT speaker units can be rotated

within their installation frames in order that the frames match the

orientation of adjacent S4-LCR65W modules.

• S4-LCR65W modules can be installed in either landscape or

portrait format. In either case, multiple modules can be either

consolidated for installation in a common wall cut-out, or installed

in individual wall cut-outs.

Grilles are not supplied with S4-LCR Series modules but can be

supplied as accessories in a range of lengths to suit installation

configurations. S4-LCR grilles attach magnetically and fully paintable.

Diagram 1

Speaker Unit

Frame Flange (pair)

Cut-out Template

Installation Frame

1.1 Carton Contents

The carton contents for all S4-LCR Series modules are essentially the

same. Items only differ in terms of format and dimension. Within each

carton can be found:

1 x Speaker Module

1 x Installation Frame

2 x Frame Flange

1 x Cut-out Template

1 x Paint Mask

1 x Document pack

A typical carton contents is illustrated in Diagram 1.

Paint Mask

Document Pack

190mm (7.5")

x 195mm (7.7")

S4-LCRMT