HIGHLY LIQUID MD24 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perekaman HIGHLY LIQUID MD24. HIGHLY LIQUID MD24 10 halaman.

Highly Liquid

MD24 Hardware Revision G

5.0 MIDI Wiring

The MD24 features MIDI IN, OUT and THRU ports.

Use the MIDI IN and MIDI THRU ports as shown in Figure 5.1. The MIDI THRU port sends an

unprocessed replica of the signal received at the MIDI IN port.

The MIDI OUT port can be used to retrieve the MD24 configuration via MIDI SysEx message. See

MD24 Firmware User Manual.

Remote MIDI connectors can be used instead of the on-board MIDI connectors. Wire MIDI receptacles

as shown in Figure 5.2. Pin 2 is wired only at the OUT or THRU side of the MIDI link. Pins 1 & 3 are

unused. Remote MIDI connectors can not be used simultaneously with the on-board MIDI connectors.

See Figure 5.3.

Figure 5.1: MIDI IN and MIDI THRU

Page 5 / 10